Walk-In Freezer Doors
THE ONLY EISA EXEMPT FABRIC DOOR
Sizes up to 6’ wide and 9’ tall
Speeds up to 27”/sec
208/230v Single Phase 50/60Hz
75% Reduction in Open Times & 50% Reduction in Footprint
RollSeal is now the standard for WICF applications.
ROLLSEAL MANUALS, CUTS SHEETS & INSTRUCTIONS
–4802-5165 (RS-500 Walk-In Freezer Door Installation, Operation Manual)
–4802-6502 (WIC, WIF Drive Assembly Replacement)
–4802-7062 (RS-500 Walk-In Freezer Door Cut Sheet)
–4802-7573 (RS-500M, RS-600M Cooler Door Touchless Activation Cut Sheet)
–Walk-In Freezer Door Brochure
RollSeal Retro-Fit Site Walk-Through
Installation Video
DESIGNED FOR ALL WALK‐IN FREEZER APPLICATIONS
In 2019, RollSeal revolutionized the walk‐in cooler door market with the release of the WIC model door … the first roll‐up fabric door to be specifically designed for use in walk‐in cooler applications. Now, we’ve built upon the same patented features and benefits introduced in the WIC Door and packaged them into the most state‐of‐the‐art walk‐in freezer door in industry history!
As a company that focuses on doors used in a variety of environmental separation applications, we understand the harsh environment in which a freezer door is expected to operate. We also know that over 80% of the load on refrigeration systems in a freezer is due to door opening events. With this in mind, the RollSeal WIF Door has been developed to provide an air‐tight seal when closed and eliminate unwanted open times throughout the work day, making costly service calls on doors and refrigeration systems a thing of the past.
In addition to the performance and operation you’re used to seeing on the WIC Door, such as our patented egress track system, built in smart switch and minimized footprint; the all‐new WIF Door also represents a huge step forward for the door development of RollSeal and will serve as the first door released that is a truly integrated “smart” system housed within the body of the door.
The old style condensation management system, which consisted of an externally mounted heating element and blower along with external duct work that provided heat to the door, is gone; replaced with a fully integrated system housed within the body of the door. The system is designed with temperature sensors, allowing the door to provide variable heat levels that will increase and decrease as needed based on external factors (temperature, humidity, pressure) and will also compensate for variations in input voltage levels.
EnergyStar estimates that $1 in energy savings inside a grocery store is equivalent to increasing counter sales by $59, you do the math!
* ROI calculation based on a 6’ wide by 9’ high opening using DOE recognized Ashrae standards with medium temp cooler @ 35F and low temp freezer @ -10F and assuming a 75F backroom environment. Dollar volume savings were $700/year on cooler door and $2000/year on freezer.
THE ORIGINAL FABRIC DOOR EISA EXEMPT
• PATENTED SEALING TECHNOLOGY
• IMPACT RESISTANT DESIGN
• 50% REDUCTION IN OPERATIONAL FOOTPRINT
• BUILT-IN CONDENSATION MANAGEMENT SYSTEM
• VARIABLE SPEED UP TO 27"/SECOND
• 30-60 MINUTE INSTALLATION TIME
• ONLY EISA EXEMPT FABRIC ROLL-UP DOOR ON MARKET
• COMPLETELY TOUCHLESS OPERATION
• IDEAL FOR NEW CONSTRUCTION OR RETRO-FIT APPLICATIONS
• ROI OF 6 MONTHS
• USER SETTABLE AUTO-CLOSURE FEATURES
• PUSH-OUT EGRESS TRACK SYSTEM
General Walk-Through
Technical Overview
Touchless Activation
Development
When RollSeal set out to develop a door specifically designed for walk-in freezer applications, we did so with the knowledge that the doors are often an afterthought when it comes to designing and laying out the cold storage environment. However, after the installation of a freezer box, the door can quickly become the weakest link in the refrigeration system.
Affordable Solutions
As a result of standard daily use on conventional rigid style refrigerated doors, seal integrity can degrade quickly, large door footprints can become space and safety problems and doors are constantly left open by personnel. The RollSeal Door provides a unique and affordable solution to these constant problems that plague your operational efficiencies. The patented air-tight (triple layer) sealing system of the RollSeal Door provides maximum environmental containment in an impact resistant design.
RollSeal Results
Combine this with the fact that the RollSeal Door reduces your overall door footprint by 50% and the auto-closure features reduce open times by 75% and it’s easy to see why the RollSeal Door is becoming the standard for WICF applications.
ROLLSEAL FEATURES:
• Patented Technology
• Impact Resistant
• Reduces Operational Footprint
• New Construction or Retro-Fit
ROLLSEAL TECHNOLOGIES:
• 3-Layers of Fabric Creating Space
Between Environments.
• Continuous Seals on Both Sides of Door, Front and Back Panels.
CUSTOM SIZES AVAILABLE:
Custom Sizes
Custom sizes up to 24′ x 24′
Custom Speeds
Custom speeds up to 48” per second
EASY SETUP & INSTALL:
STEP 1 – Placement
STEP 2 – Stand Up & Mount
STEP 3 – Electrical
Ready to Use!
REFRIGERATION INDUSTRY
RollSeal™ Doors are the perfect fit for a number of companies and environments in the refrigeration industry. Our sealing technology creates an airtight environment for your product, and our small footprint can easily adapt to areas with space limitations.
PATENTED
TECHNOLOGY
WALK-IN
COOLER
CONTROLLED
ENVIRONMENT
COLD
STORAGE
WALK-IN
FREEZER
NIGHT
DOORS
Over the years, RollSeal has developed a diverse line of products that utilize our patented sealing technology. These products have ranged from roll-up fabric doors, to roll-up shutters to rolling sidewall systems. We specialize in making custom solutions that meet the needs of a wide range of markets and applications and would love to be a part of the design phase of your next project.
